KML Bearing USA
IPPE 2019 – Atlanta, Georgia
Meet with us in Atlanta at IPPE, February 12th-14th. Discover the newest addition to KML Bearing USA’s family of Corrosion Resistant Products.
Visit Booth #B5874.
Discover the Benefits of IP69K with
KML Bearing USA’s full-line of Stand-Out™ Bearing Units
If it’s not wet, it’s not worth it. Tried and tested, KML Bearing USA has designed front caps, back seals and associated v-rings to prevent water from collecting in bearing cavities. Using IP69K standards of measure to test the design, these Cap and Seal Kits prevent water ingress from occurring with a hermetically sealed bearing cavity.
KML Bearing USA’s cap and seal system reduces potential bacteria harborage as well as lubrication cycles by preventing water from contacting the bearing. By eliminating the ingress of water, solvents and cleaning agents during wash-down, bearing lubricants are preserved, minimizing premature degradation.
Further improving upon the bearing’s integrity, K-Poly™ Solid Polymer Lubricant provides an H-1 Lube-for-Life resin that further protects the bearing. Also, with K-Poly™, no more attention is drawn to the bearing because of lubricant weeping past the seals, making FDA inspections that much easier.
Plus, KML Bearing USA’s Front Cap Sealing System further reduces risk by providing an OSHA compliant solution for rotating shaft coverage regulations.
KML Bearing USA’s Stand-Out Mounted Bearings
coupled with the Poly-Guard IP69K Sealing System
& K-Poly™ High Performance Solid Polymer Lubricant
…reducing risk…increasing efficiency