SSUC Normal Duty Set Screw Locking, Wide Inner Ring, Greaseable
The SSUC is made from 440C series stainless steel and is corrosion resistant. The SSUC insert has a spherical OD which allows it to self-align when mounted in various types of Corrosion Resistant Mounted Bearing housings.
It features a Silicon Contact Seal designed to keep lubricant in while keeping contaminants out. The SSUC insert is charged with Mobil FM222 NSF H1 grease for washdown applications. The silicon seal is designed to purge as new food grade grease is gradually pumped into the bearing cavity. The silicon seal is protected by a 316 series stainless steel flinger positioned directly in front of the seal contact area. This flinger creates a barrier channel that makes it difficult for dirt and contaminants to get inside the insert bearing. When in operation dirt and debris are slung away from the bearing by centrifugal force.
The set screw area is high frequency annealed to reduce the potential for cracking in this critical area. The set screws are knurled cup-point stainless steel for increased shaft locking.
The SSUC insert comes standard as a regreaseable type with a grease access hole(s) machined in the outside diameter.
SSSB Light Duty Set Screw Locking, Narrow Inner Ring
The SSSB is made from 440C series stainless steel and is corrosion resistant. The SSSB insert has a spherical OD which allows it to self-align when mounted in various types of Corrosion Resistant Mounted Bearing housings.
It features a Silicon Contact Seal designed to keep lubricant in while keeping contaminants out. The SSSB insert is charged with Mobil FM222 NSF H1 grease for washdown applications. The the silicon seal is bonded to a stainless steel front plate that is crimped in place on the circumference of the outer ring.
The set screw area is high frequency annealed to reduce the potential for cracking in this critical area. The set screws are knurled cup-point stainless steel for increased shaft locking. This version is available in the 204 and 205 series sizes only. They are primarily used in tight applications where space is at a premium. They can also be used in pressed stainless steel housings for light load applications.
The SSSB insert comes standard as a regreaseable type with a grease access hole(s) machined in the outside diameter.
